I. HAZARDOUS AND NON-HAZARDOUS SOLID FUEL *
Examples: Filter Cakes, Paint Solids, Refinery Wastes, Carbon, Resins, PPE, Rags, Debris, Consumer Products
Specifications:
Heat Content – > 5,000 BTU/lb. (2,000-5,000 BTU may be accepted on a case-by-case basis)
Chlorides - ≤ 5%(<5% may be accepted on a case by case basis)
PCB’s – < 40 ppm
Metals – Click Metals Guidelines
<10% by volume gravel, rocks, stones, etc.
Examples of materials that are not suitable for the Solid Fuel Program include medical wastes, free liquids, wet sludges, construction debris (concrete, steel, etc.) lab packs, aerosol cans, nitrocellulose, and reactive, explosive, and radioactive materials, as well as other materials that may pose a processing problem.
II. HAZARDOUS AND NON-HAZARDOUS LIQUID FUEL
Examples: Solvents, Waste Oil, Coolants, Alcohols, Off-Spec Fuels
Specifications:
Heat Content – > 5,000 BTU/lb. (>2,000-5,000 BTU may be accepted on a case-by-case basis)
Chlorides - ≤ 3% (<3% may be accepted on a case-by-case basis)
PCB’s – < 40 ppm
Metals – Click Metals Guidelines
III. NON-REGULATED/NON-HAZARDOUS MATERIALS THAT CAN REPLACE RAW MATERIALS USED IN CEMENT PRODUCTION
Examples: Fly Ash, Sand, Iron Oxide, High Calcium-Type Materials
Specifications:
Size - < 20" x 20" x 20"
Sulfur - < 3%
Free of debris such as wood, concrete, metal, tires, etc.
© Copyright 2008 Giant Cement Holding, Inc.
